|
 |
 |
|
Lubrication Point :
1 Plain bearings |
| |
During Assembly
and Maintenance :
Clean bearing shells and shaft,
rub a thin film of MOLYKOTE®
G-n Plus Paste onto the sliding
surface, or us MOLYKOTE
G Rapid Plus Spray. |
| |
During Operation :
Relubricat with
MOLYKOTE® Br-2 Plus
Grease by means of a grease gun. |
| |
Result :
Reduced wear,
Extended Inbrication
intervals. |
Lubrication Point :
4 Wire ropes |
| |
During Assembly
and Maintenance :
Apply MOLYKOTE® 3694 by brush
or spray |
| |
During Operation :
Apply MOLYKOTE® 3694
by rush or spray. |
| |
Result :
Reduced wear,
Extended adhesion
and water wash-out resistance. |
Lubrication Point :
1 Plain bearings |
| |
During Assembly
and Maintenance :
Clean bearing shells and shaft,
rub a thin film of MOLYKOTE®
G-n Plus Paste onto the sliding
surface, or use MOLYKOTE
G Rapid Plus Spray. |
| |
During Operation :
Relubricate with
MOLYKOTE® Br-2 Plus
Grease by means of
a grease gun. |
| |
Result :
Reduced wear,
Extended Iubrication intervals. |
Lubrication Point :
3 Enclosed gears |
| |
During Assembly
and Maintenance :
Apply MOLYKOTE® G-n Plus
Paste to clean tooth flanks and / or
spary with MOLYKOTE® G Rapid
Plus Spray, or apply MOLYKOTE®
321R Bonded Lubricant Spray to
clean tooth flanks. |
| |
During Operation :
Add 3-5% of
MOLYKOTE® M55 Plus
to the gear oil by volume. |
| |
Result :
Prevents tooth flank damage. |
Lubrication Point :
3 Enclosed gears |
| |
During Assembly
and Maintenance :
Apply MOLYKOTE® G-n Plus
Paste to clean tooth flanks and / or
spary with MOLYKOTE® G Rapid
Plus Spray, or apply MOLYKOTE®
321R Bonded Lubricant Spray to
clean tooth flanks. |
| |
During Operation :
Add 3-5% of
MOLYKOTE® M55 Plus
to the gear oil by volume. |
| |
Result :
Prevents tooth flank damage. |
Lubrication Point :
1 Plain bearings |
| |
During Assembly
and Maintenance :
Clean bearing shells and shaft,
rub a thin film of MOLYKOTE®
G-n Plus Paste onto the sliding
surface, or use MOLYKOTE
G Rapid Plus Spray. |
| |
During Operation :
Relubricate with MOLYKOTE®
Br-2 Plus Grease by means fo
a grease gun. |
| |
Result :
Reduced wear,
Extended Inbrication intervals. |
Lubrication Point :
2 Open gears |
| |
During Assembly
and Maintenance :
Clean tooth flasnks and apply
MOLYKOTE® 165 LT or
MOLYKOTE® 3694 |
| |
During Operation :
Apply MOLYKOTE® 165 LT or
MOLYKOTE® 3694 by brush. |
| |
Result :
Reduced wear and pitting. |
Lubrication Point :
1 Plain bearings |
| |
During Assembly
and Maintenance :
Clean bearing shells and shaft,
rub a thin film of MOLYKOTE®
G-n Plus Paste onto the sliding
surface, or us MOLYKOTE
G Rapid Plus Spray. |
| |
During Operation :
Relubricate with MOLYKOTE®
Br-2 Plus Grease by means of
a grease gun. |
| |
Result :
Reduced wear,
Extended Inbrication intervals. |
|
|
